GUFERO EKO L2
Description:
GUFERO EKO L2 is a plastic grease made from synthetic ester and high-quality rape-seed oil thickened with calcium soap. It is refined with additives which increase oxidation stability and corrosion protection and with additives which improve high-pressure properties and adhesion. It is characterized by high biodegradability. It has a short-fibre structure and it is of semi-soft consistency.
Use:
Intended especially for lubricating slide and rolling-contact bearings, small gears as well as other lubricated contacts working under normal or high pressure. It is suitable for lubricating all loose fits which working in humid environments or in direct contact with water. The main sphere of its application is lubrication of sliding fits and of certain rolling fits of mobile machines (e.g. agricultural machinery – harvesters, mowers, forestry and construction mechanisms, etc.), particularly in those cases in which leaked grease poses a risk of contaminating the environment (e.g. protected ecological areas, etc.). It is used with good results also for lubricating chassis of vehicles and is a biodegradable alternative to greases derived from crude oil.
GUFERO LV 00 EP
Description:
GUFERO LV 00 EP is a semi-liquid plastic grease produced from carefully selected crude base oils of high quality thickened with lithium soap. It is refined with additives against oxidation and rust and with a high-pressure additive (EP).
Use:
It is intended especially for lubrication of gearboxes and motors with reducers which require a semi-liquid plastic grease, of slide and rolling-contact bearings and of sliding surfaces working under increased pressure and high dynamic stress. The grease forms an elastic lubricating film resistant to high pressures. It is suitable for central lubrication systems.
GUFERO LC 2
Description:
GUFERO LC 2 is a plastic grease produced from carefully selected crude base oils of high quality which are thickened with complex lithium soap. Refined with additives against oxidation and rust, it contains a high-pressure additive (EP). It has a short-fibre structure, it is of semi-soft consistency and brown colour. It has very good adhesion to metal surfaces.
Use:
Intended especially for lubrication of loaded rolling-contact bearings working at high temperatures. It is also suitable for slide bearings or for small gears. Its typical property is high thermal and oxidation stability which makes it possible to use the grease in loose fits working at temperatures of up to approx. 150 °C (in the case of frequent additional lubrication up to 180 °C) for a relatively long period of time. Good resistance to water makes this product suitable for lubrication of fits working which are in contact with water.
GUFERO G3
Description:
GUFERO G3 is a plastic grease produced from carefully selected crude base oils of high quality which are thickened with calcium soap. It contains high-quality, chemically pure graphite which significantly improves its emergency properties. It has a short-fibre structure, it is of semi-solid consistency and grey to black colour.
Use:
The grease is intended especially for lubrication of slide bearings working under increased and high pressure. It is also used for lubrication of slow loaded rolling-contact bearings and gears (especially slow open gears). It is used with good results for the running-in of sliding fits and also for lubrication of laminated springs of cars, guide surfaces of some machine tools and for lubrication of friction surfaces of moving mechanisms made of wood, etc. It can also be used for lubrication of sliding fits of some mobile machines (e.g. construction machines, agricultural machines – harvesters, mowers, etc.). It is especially suitable for lubrication of all loose fits which work in humid environments or in direct contact with water. The grease has very good ‘emergency’ properties which make its use possible in cases where there is a risk of a short run without sufficient supply of grease.